Accessory
Oxygen Sensor Cell
| Model | M-04 |
|---|---|
| Mearsuring method | Electrochemical (Galvanic cell type) |
| Measurement range | 0~99.9 Vol.% |
| Output signal | 13 to 16.5mV @ dry atmospheric condition |
| Dimensions | Φ31.4mm×39.5mm |
| * Power signal may reduce during storage depending on oxygen concentration in the atmosphere. * Sensor connection is 3pin connector * Package is can type with nitrogen gas enclosed. |
|
Isolated USB to RS-485/UART Converter
| Model | KCD-TK100 |
|---|---|
| Conversion method | USB to RS485 / USB to UART |
| Transmission Speed | ~115,200bps / D:7,8 / P:even,odd,none |
| RS485 | 2-wire / RS485+, RS485- |
| UART | 3.3~5V TTL |
| Dimensions | 97mm x 52mm x 30mm, CABLE around 1.5m |
| * UART cable for SenseCube products is provided (Inquiry) * CP210x driver: Connect device after installing the driver |
|
PE300 EC Electrode
| Model | PE300-10A |
|---|---|
| Sensor Terminal | Temperature1, Temperature2, EC1, EC2 (4-Wire, Apolar) |
| Dimensions | Electrode ø12.6mm, Wire 3m(option 1m) |
| * PE300 only, Stripped Wire * Periodic cleaning and maintenance is required. Electrode life may vary depending on the environment. |
|
PE300 pH Electrode
| Model | PE300-10B |
|---|---|
| Electrode structure | Epoxy body, Ag/AgCl, Double junction |
| Dimensions | Electrode ø12.6mm, length 3m, BNC terminal |
| * Immerse the electrode tip in the buffer container provided to prevent it from dryness. * Periodic cleaning and maintenance is required. Electrode life may vary depending on the environment. |
|
PE300 Electrode Holder
| Model | Electrode Holder NPTF 1/2", 3/4" |
|---|---|
| Product Material | Polypropylene |
| Using condition | 200PSI@23.9℃, -17.8~100℃ |
| * (Left) 1/2" (Right)3/4" in the picture | |
Mounting Bracket for KCD-HP series (NEW type)
| Model | HP Bracket(NEW type) |
|---|---|
| Product Material | Acetal + Stainless steel |
| Dimensions | 50mm×32mm×63mm |
| * Used between the top and bottom cover. * Easy to attach and detach without interference of terminals attached to wire compared to Old type. |
|
Mounting Bracket for KCD-HP series (OLD type)
| Model | HP Bracket(OLD type) |
|---|---|
| Product Material | Aluminnum (solidity) |
| Dimensions | 91.5mm×50.5mm×50mm |
Adapter for KCD-HP series
| Model | HP Calicration Adapter(FLOW type) |
|---|---|
| Product Material | Aluminnum (solidity) |
| Dimensions | ø44.5mm x 12.2mm(Nipple Excluded) |
| * For testing or revisioning / For faster response time / When using gas containing pollutants or corrosive substances (after purification & filtering) | |
Filter for HP
| Model | HP-100 filter / HP200, HP300(official use)Filter |
|---|---|
| Product Material | PE |
| Dimensions | KCD-HP 100 filter : ø24.0mm x (69.5+25.5mm), See Below KCD-HP200, KCD-HP300(official use) Filter : ø24.0mm x 25.5mm |
| * KCD-HP100 filter is composed of 69.5mm and 25.5mm filter. * Periodic replacement is required depending on the usage environment. |
|
pH Buffer solution
| Model | pH Buffer Solution (pH4.01 / pH7.0 / pH10.0) |
|---|---|
| Product capacity | 45ml |
| Dimensions | Φ42.5mm×84.5mm |
| * When transferring the electrode to another buffer or solution, use it after washing it with distilled water. | |
EC Buffer solution
| Model | Conductivity Solution(1413uS/cm@25℃) |
|---|---|
| Product capacity | 45ml |
| Dimensions | Φ42.5mm×84.5mm |
| * Please use it immediately as it may become contaminated after opening * When transferring the electrode to another buffer or solution, use it after washing it with distilled water and removing moisture with soft cloth. |
|
DC power supply
| Model | DC adapter |
|---|---|
| Rated voltage | AC220V, 50-60Hz, 3A |
| Rated output | DC 24V 2A |
We will answer your inquiry.